Comments»

1. Nick - May 23, 2006

I wanted to add a add that I’ve had a lot of problems recieving calls with the WIP330. Often it does not even ring. I’ll be running a network trace soon and make sure to report the results.

2. rossirj - May 27, 2006

What is the default username/password for the web interface?

3. Nick - May 27, 2006

Good question and I should have mentioned it…
admin/admin

4. Timothy Ding - May 29, 2006

Default username/password – try:
admin:admin
admin:0000
[blank]:admin
[blank]:0000

Check this site out too:
http://www.voip-info.org/wiki/index.php?page_id=2942

5. Timothy Ding - May 29, 2006

Does anyone know how to install it in windows?

6. Nick - May 29, 2006

By ‘install’ do you mean use ActiveSync and treat it like a regular windows CE device?

Hevad has posted a comment on this article:
https://archatechs.wordpress.com/2006/05/19/the-mythical-wip330-has-arrived-and-gets-reviewed/
and we are working on a solution. In fact I think he has it working.

7. Nick - May 31, 2006

I’ve added the instructions for connecting to Windows XP in the last part of the review here:
http://archatechs.wordpress.com/2006/05/24/wip330-review-addendum/

8. Giab - June 11, 2006

My test shows that there is not problem in getting connection to any Wifi, when you turn off and on again, the previous known network comes back. It has NTP support, works fine too. New firmware is out.

9. Nick - June 11, 2006

Giab,
What verison of the firmware do you have?
I’ve seen several different versions reported around the net. I think linksys has made some production changes quietly.

10. giab - June 15, 2006

Nick Its wip_330_v1_06, the STUN issue can be resolved by keying in outboud proxy.

11. shasijeen - July 13, 2006

hi everybodys.

i have wip 330 linksys but the firmware is 1.0.4. how to upgrade to 1.0.6 please help me.
thanks.

12. Jerome - July 15, 2006

Could somebody provide a working link to the new firmwares? The one from http://www.wip330.com appears to be no longer working.

Thanks!

13. Nick - July 17, 2006

Just a reminder, archatechs has moved to http://www.archatechs.com
you can find the entire 3 part review of the WIP330 here at:
http://www.archatechs.com/blog/files/category-4.html

14. Smitty - July 17, 2006

Does the WIP300/330 work with Broadvoice? If so how do I set up the SIP information?

15. Nick - July 17, 2006

For those interested in the drivers, check out the new downloads page over at the new site:http://www.archatechs.com/page6/page6.html

Smitty- as for broadvoice support, it should work. We have not tried configuring it for BV directly however.
If you are behind a firewall you’ll probably run into NAT issues. Unless you can forward the approprate UDP ports then you may never get the phone to register. Lets hope linksys adds STUN (firewall traversal) support soon!

16. Sam Hatz - July 18, 2006

So here’s a question from a total nube: Laugh if you must. I live in the US but I am going to school in Switzerland. I want to get Vonage in the US and use this phone on my schools campus-wide WLAN so that my parents can call my vonage number to talk to me without paying long distance and also so I can call people in the US without long distance charges. It seems that this phone can only be made to work by God himself. So, questions are: 1. Will my Vonage idea work? 2. What do I need to know about my school’s WLAN to configure the phone so it actually works. A list of questions to ask the IT guy would be great.

17. Nick - July 18, 2006

Sam- you could absloutly do that, at least in concept.

First, this particular phone may not be your best bet since it doesnt do well with going across firewalls. If your school’s wifi gives you a true public IP address, that is not a problem, but my guess is that they do not. For a wifi phone that works well with firewalls (NAT), I like the Hitachi Cable IP5000.

Secondly, vonage will allow you to use SIP, or the open standard for internet phone, but it costs extra.

Consider looking at something like broadvoice.com or telasip.com which are not only cheaper but easier to configure on a wide range of devices.

Finally, this is a GREAT excuse to build a Trixbox server and be your own phone company. You could cominbine a number from http://www.freedigits.com (for the us) and http://www.voxbone.com for Switzerland and really work some magic. Ward has a guide up over at nerdvittles.com and there is a lot at http://www.archatechs.com and http://www.trixbox.org as well.

Good luck and keep us posted- just make sure to do so over at the new site, http://www.archatechs.com

18. Andr - August 5, 2006

Does anybody know where to get firmware newer than 1.00.00 ?

19. Nick - August 5, 2006

Andr,
Its available at the new site in the forums
http://www.archatechs.com/forum/phpBB2/viewtopic.php?t=5

20. Timothy Ding - August 31, 2006

Sam,
Stanaphone’s registration is free and it gives you an actual US number for ppl to call in. You just have to get out going credits(low rates) to make calls. It also has a voicemail to email feature where you get voicemails in you email.
http://www.stanaphone.com/ .

21. Bartosz - November 29, 2006

WIP330
Username: admin
Password: 0000

22. Bill - January 6, 2007

According to Linksys Product Mangagement, there will be no STUN support for the WIP330. I have twice confirmed this.

23. Junag - May 1, 2007

hi guys:

i am using INTELEFONE voip right now using a pc-connected travel phone. i wonder if WIP330 can be used. i really want to get this iphone so i can make calls w out a PC thru my wireless network.

but before i buy this iphone unit, i would like to make sure this works with my INTELEFONE voip provider.

would appreciate any help from you guys.

many thanks

ju

24. Rickster - August 7, 2007

WIP330 Version 1.01.00 (so I can use Skype)
I want to go here but the admin username of admin and the password of 0000 doesn’t work. Any ideas what the admin username and password really is?
http://192.168.1.x/sysAdmin/

25. marcoscu - December 2, 2007

Try Admin/0000